{"id":1025,"date":"2019-10-21T16:46:24","date_gmt":"2019-10-21T14:46:24","guid":{"rendered":"https:\/\/metauxbc.com\/general-data\/"},"modified":"2020-01-07T20:16:22","modified_gmt":"2020-01-07T19:16:22","slug":"general-data","status":"publish","type":"page","link":"https:\/\/metauxbc.com\/en\/general-data\/","title":{"rendered":"General data"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
<\/div>\n\t\t\t\t\t\t
\n\t\t\t\n\t\n<\/svg>\t\t<\/div>\n\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

General data<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Pitch Diameter Constants<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\tSee the document<\/span>\n\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\tPour obtenir le diame\u0300tre primitif d\u2019un sprocket, multipliez la constante du nombre de dents par le pas de la chai\u0302ne. To obtain pitch diameter of a sprocket, multiply the constant for the number of teeth from the table, by the chain pitch.\r\nNb dents Nb teeth\r\nConstante Constant\r\nNb dents Nb teeth\r\nConstante Constant\r\nNb dents Nb teeth\r\nConstante Constant\r\nNb dents Nb teeth\r\nConstante Constant\r\nNb dents Nb teeth\r\nConstante Constant\r\n5 6 7 8 9\r\n10 11 12 13 14\r\n15 16 17 18 19\r\n20 21 22 23 24\r\n25 26 27 28 29\r\n30 31 32 33 34\r\n1.7013 2.0000 2.3048 2.6131 2.9238\r\n3.2361 3.5495 3.8637 4.1786 4.4940\r\n4.8097 5.1258 5.4422 5.7588 6.0755\r\n6.3925 6.7095 7.0267 7.3439 7.6613\r\n7.9787 8.2962 8.6138 8.9314 9.2491\r\n9.5668\r\n9.8845 10.2023 10.5201 10.8380\r\n35 36 37 38 39\r\n40 41 42 43 44\r\n45 46 47 48 49\r\n50 51 52 53 54\r\n55 56 57 58 59\r\n60 61 62 63 64\r\n11.1558 11.4737 11.7916 12.1096 12.4275\r\n12.7455 13.0635 13.3815 13.6995 14.0175\r\n14.3356 14.6536 14.9717 15.2898 15.6079\r\n15.9260 16.2441 16.5622 16.8803 17.1984\r\n17.5166 17.8347 18.1529 18.4710 18.7892\r\n19.1073 19.4255 19.7437 20.0618 20.3800\r\n65 66 67 68 69\r\n70 71 72 73 74\r\n75 76 77 78 79\r\n80 81 82 83 84\r\n85 86 87 88 89\r\n90 91 92 93 94\r\n20.6982 21.0164 21.3346 21.6528 21.9710\r\n22.2892 22.6074 22.9256 23.2438 23.5620\r\n23.8802 24.1984 24.5167 24.8349 25.1531\r\n25.4713 25.7896 26.1078 26.4260 26.7442\r\n27.0625 27.3807 27.6990 28.0172 28.3355\r\n28.6537 28.9720 29.2902 29.6085 29.9267\r\n95 96 97 98 99\r\n100\r\n101\r\n102\r\n103\r\n104\r\n105\r\n106\r\n107\r\n108\r\n109\r\n110\r\n111\r\n112\r\n113\r\n114\r\n115\r\n116\r\n117\r\n118\r\n119\r\n120\r\n121\r\n122\r\n123\r\n124\r\n30.2450 30.5632 30.8815 31.1997 31.5180\r\n31.8362 32.1545 32.4727 32.7910 33.1093\r\n33.4275 33.7458 34.0641 34.3823 34.7006\r\n35.0188 35.3371 35.6554 35.9737 36.2919\r\n36.6102 36.9285 37.2467 37.5650 37.8833\r\n38.2016 38.5198 38.8381 39.1564 39.4746\r\n125\r\n126\r\n127\r\n128\r\n129\r\n130\r\n131\r\n132\r\n133\r\n134\r\n135\r\n136\r\n137\r\n138\r\n139\r\n140\r\n141\r\n142\r\n143\r\n144\r\n145\r\n146\r\n147\r\n148\r\n149\r\n150\r\n151\r\n152\r\n153\r\n154\r\n39.7929 40.1112 40.4295 40.7475 41.0660\r\n41.3843 41.7026 42.0209 42.3392 42.6574\r\n42.9757 43.2940 43.6123 43.9306 44.2488\r\n44.5671 44.8854 45.2037 45.5220 45.8403\r\n46.1585 46.4768 46.7951 47.1134 47.4317\r\n47.7500 48.0683 48.3865 48.7048 49.0231\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

How to read Sprocket Tables<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\tSee the document<\/span>\n\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\tDiame\u0300tre du rouleau - Roller diameter\r\n FONTE * CAST IRON # 500 4.000 Pitch PL : 0.69 \/ ROLL : 0.72\r\n \r\n \r\nNo de pie\u0300ce Part Number\r\nDia. Prim. Pitch Dia.\r\nDia. Ext. O.D.\r\nMoyeu Hub\r\nDim. Moyeu Hub Dimension\r\nATB RSB\r\nMaximum Bore (KwSS)\r\nPoids Weight\r\na\r\nb\r\nc\r\nd\r\ne\r\nf\r\ng\r\nh\r\n \r\nTOUTES LES MESURES SONT EN POUCES - ALL MEASURES ARE IN INCHES\r\na- Nume\u0301ro de la pie\u0300ce (non usine\u0301e). b - Diame\u0300tre primitif. Part number (not machined). Pitch diameter.\r\nc- Diame\u0300tre exte\u0301rieur standard. Sur demande, les pie\u0300ces peuvent e\u0302tre fournies a\u0300 un diame\u0300tre diffe\u0301rent. Standard outside diameter. On request, sprockets can be supplied with another diameter.\r\n d- Type(s) des moyeux standards. Standard hub type(s).\r\ne- Dimensions du moyeu standard pour pie\u0300ces fournies non usine\u0301es. Standard hub dimensions for parts\r\nsupplied without machining. Hub Dia. x LTB\r\nType A\r\nType B\r\nHub Dia.\r\nType C LTB\r\n- Nume\u0301ro mai\u0302tre et mate\u0301riau de fabrication\r\n- Master number and material\r\n f- Avant-Trou Brut standard pour pie\u0300ces avec moyeux B ou C. (Type A fourni sans trou si non spe\u0301cifie\u0301) Standard Rough Stock Bore for parts with B or C hub. (Type A supplied without hole if not specified)\r\ng- Perc\u0327age maximum recommande\u0301 pour moyeu standard (avec kwss). Maximum recommended bore for standard hub (with kwss).\r\nh- Poids brut approximatif du sprocket non usine\u0301, avec moyeu standard. (Poids en livres) Approximate weight for rough bore sprocket with standard hub. (Weight in pounds)\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Standard keyways & setscrews ( kwss )<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\tSee the document<\/span>\n\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t Bore Size Dia. Perc\u0327age\r\nKeyway width x depth Ch. Clef largeur x prof.\r\nS.Screw dia. Diam. de vis\r\nBore Size Dia. Perc\u0327age\r\nKeyway width x depth Ch. Clef largeur x prof.\r\nS.Screw dia. Diam. de vis\r\n15\/16 \u2013 1-1\/4 1-5\/16 \u2013 1-3\/8 1-7\/16 \u2013 1-3\/4 1-13\/16 \u2013 2-1\/4 2-5\/16 \u2013 2-3\/4\r\n1\/4 x 1\/8 5\/16 x 5\/32 3\/8 x 3\/16\r\n1\/2 x 1\/4 5\/8 x 5\/16\r\n1\/4 5\/16 3\/8 1\/2 5\/8\r\n2-13\/16 \u2013 3-1\/4 3-5\/16 \u2013 3-3\/4 3-13\/16 \u2013 4-1\/2 4-9\/16 \u2013 5-1\/2 5-9\/16 \u2013 6-1\/2\r\n3\/4 x 3\/8 7\/8 x 7\/16\r\n1 x 1\/2 1-1\/4 x 5\/8 1-1\/2 x 3\/4\r\n5\/8 5\/8 3\/4 3\/4 3\/4\r\n- Quandunchemindeclef+visa\u0300pression(kwss)sontdemande\u0301setquelesdimensionsnesontpasspe\u0301cifie\u0301es,ilsserontfournisselonlatablecihaut. - Quandcen\u2019estpasspe\u0301cifie\u0301chemindeclef+visa\u0300pression,lespie\u0300cessontfourniesavecunperc\u0327ageuni(plainbore).\r\n- Quandunchemindeclef\u00abtaper\u00bbestrequis,unstandardde1\/8\u201daupiedestutilise\u0301sinonspe\u0301cifie\u0301\u2013laprofondeurstandarde\u0301tantauboutle+profond. - Laclefn\u2019estpasfourniea\u0300moinsqu\u2019ellesoitdemande\u0301e,charge\u0301eensus.\r\n- Silespie\u0300cessontperce\u0301esettaraude\u0301espourdesvisa\u0300pression,celles-ciserontfournies.\r\n- Lescheminsdeclefstandardssontaligne\u0301saucentred\u2019unedentpourlaplupartdessprockets.\r\n- L\u2019emplacementstandarddesvisa\u0300pression(2)est:unesurlechemindeclefetl\u2019autrea\u030090degre\u0301s,pourlaplupartdessprockets.\r\n- Whenkeywaysandsetscrewsarerequestedbutdimensionsarenotgiven,theywillbesuppliedaspertheabovetable.\r\n- Whenkeywaysandsetscrewsarenotspecified,thepartsarefurnishedwithplainbore.\r\n- Whentaperkeywaysarerequired,astandardtaperof1\/8\u201dperfootisusedunlessotherwisespecified\u2013standardkeywaydepthatdeepend. - Keysarenotfurnishedexceptuponrequestandatextracost.\r\n- Ifpartsaretobedrilledandtappedforsetscrew(s),thesetscrew(s)willbeprovided.\r\n- Standardkeywaysarealignedonthecenterlineofatoothformostofallsprockets.\r\n- Standardsetscrews(2)areplaced:oneoverthekeywayandoneat90degrees,formostofallsprockets.\r\nTOLE\u0301RANCES DE PERC\u0327AGE \/ BORE TOLERANCES :\r\n \r\nDiame\u0300tre de perc\u0327age Bore diameter\r\nTole\u0301rance (en pouces) Tolerance (inches)\r\nJusqu\u2019a\u0300\/Upto 2\u201d\r\nPlus de \/ Over 2\u201d jusqu\u2019a\u0300 \/ thru 4\u201d Plus de \/ Over 4\u201d jusqu\u2019a\u0300 \/ thru 6\u201d\r\nPlus de \/ Over 6\u201d\r\n+ 0.003 + 0.004 + 0.006 + 0.008\r\nLes sprockets et roues guide sont perce\u0301s aux tole\u0301rances commerciales (tableau ci haut). Des tole\u0301rances plus serre\u0301es sont disponibles, mais elles doivent e\u0302tre spe\u0301cifie\u0301es a\u0300 la demande, car cela peut entrai\u0302ner des cou\u0302ts supple\u0301mentaires.\r\nSprockets and idlers are bored to commercial tolerances (see table, above). Closer tolerances are available, but must be specified at the order, with possible extra cost.\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Most common types of bore availables<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\tSee the document<\/span>\n\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\tNFORMATIONS GE\u0301NE\u0301RALES GENERAL DATA\r\nTYPES DE PERC\u0327AGES LES PLUS COURANTS DISPONIBLES MOST COMMON TYPES OF BORE AVAILABLES\r\n \r\nPlain SS only KwSS Taper\r\nBronze Bush. Plastic Bush.\r\nBearing\r\nPerc\u0327age droit, sans chemin de clef ni vis a\u0300 pression Straight bore, without keyway or setscrews\r\nPerc\u0327age droit, sans chemin de clef, avec 2 vis a\u0300 pression Straight bore, without keyway, with 2 setscrews\r\nPerc\u0327age droit avec chemin de clef + 2 vis a\u0300 pression Straight bore with keyway + 2 setscrews\r\nPour recevoir manchons coniques (Hub d\u2019Acier pour Manchon) To receive taper bushings (Steel Hubs for Split Taper Bushings)\r\nAvec manchon en bronze + chemin de graisse & graisseur With bronze bushing + grease groove & grease fitting (Grade SAE660 si non spe\u0301cifie\u0301 \/ if not specified)\r\nAvec manchon en polyme\u0300re (NYLOIL si grade non spe\u0301cifie\u0301) With polymeric bushing (NYLOIL if grade not specified)\r\nAvec coussinet(s) de roulement, monte\u0301s ou non With bearing(s), mounted or not\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Manufacturing materials - Cast irons and steels<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\tSee the document<\/span>\n\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\tSTANDARD\r\nFonte grise \/ Gray Cast Iron ASTM A-48 Class 30\r\nSTANDARD\r\nPour jante ou dents trempe\u0301es For hardened teeth or rim\r\n \r\nFonte grise \/ Gray Cast Iron ASTM A-48 Class 40\r\nAussi disponible sur demande pour pie\u0300ces non trempe\u0301es \/ Also available on request for non hardened parts\r\nAutres grades\r\nDisponibles sur demande Seulement\r\nOther grades\r\nAvailable on request only\r\nFontes ductile \/ Ductile Irons ASTM A-536 : Grade 65-15-12\r\nGrade 80-55-06 (Trempable \/ Hardenable)\r\nGrade 100-70-03 (Trempable \/ Hardenable)\r\nFonte anti-abrasion \/ Abrasion-Resistant Cast Iron :\r\nASTM A-532 Class I ( Ni-Hard ) (Applications limite\u0301es \/ Restricted applications)\r\nD\u2019autres types de fontes peuvent e\u0302tre fournis sur demande pour des applications spe\u0301ciales.\r\nOther Cast Iron alloys can be supplied on request for special applications.\r\nACIERS - STEELS\r\nSTANDARD\r\nCSA G40.21 Gr.44W ou\/or ASTM A-36 ou\/or AISI 1018\r\nSTANDARD\r\nPour dents ou jante trempe\u0301e For hardened teeth or rim\r\n \r\nAISI 1040 ou\/or AISI 1045\r\nAussi disponible sur demande pour pie\u0300ces non trempe\u0301es \/ Also available on request for non hardened parts\r\nAutres grades\r\nDisponibles sur demande Seulement\r\nOther grades\r\nAvailable on request only\r\nAciers coule\u0301s \/ Steel Castings : ASTM A-27 & A-148 : gr.N-1 a\u0300 \/ to gr.175-145 ASTM A-128 : Aciers au mangane\u0300se \/ Manganese Steels\r\nASTM A-216 & A-352 (...et autres \/ ...and others) Aciers allie\u0301s \/ Alloy Steels : AISI 1340, 3140, 4130, 4140, 4340, etc...\r\nAlliages CHT \/ CHT Alloys : CHT100 , CHT400 , SCANDIA\r\nD\u2019autres types d\u2019aciers (ex: aciers outil) peuvent e\u0302tre fournis sur demande pour des applications spe\u0301ciales.\r\nOther Steel alloys (ex: tool steels) can be supplied on request for special applications.\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t

Other materials<\/h2>\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t\n\t\t\t\t\t\tSee the document<\/span>\n\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\tAciers Inoxydables - Stainless Steels\r\n(Disponibles sur demande seulement) (Available on request only)\r\nPRINCIPAUX ALLIAGES COMMUNS \/ MAIN COMMON ALLOYS :\r\n304 , 304L , 316 , 316L , ....\r\nPRINCIPAUX ALLIAGES COULE\u0301S \/ MAIN CAST ALLOYS :\r\nASTM A-743 (Tous les grades, pour re\u0301sistance a\u0300 la corrosion \/ All grades, for corrosion resistance) ASTM A-297 (Tous les grades, pour re\u0301sistance a\u0300 la chaleur \/ All grades, for heat resistance)\r\nAutres Mate\u0301riaux - Other Materials\r\n(Disponibles sur demande seulement) (Available on request only)\r\nALUMINIUMS \u2013 BRONZES \u2013 POLYME\u0300RES \/ ALUMINIUMS \u2013 BRONZES \u2013 POLYMERS\r\nSpe\u0301cifiez la nuance lors de votre demande de prix Specify the grade with your price request\r\nDIMENSIONS : Les dimensions mentionne\u0301es dans ce catalogue, notamment celles des moyeux, peuvent diffe\u0301rer des dimensions indique\u0301es pour les pie\u0300ces livre\u0301es usine\u0301es. Si ces dimensions sont critiques, vous devrez le pre\u0301ciser. SE\u0301CURITE\u0301 : Il est de la responsabilite\u0301 de l\u2019entrepreneur, de l\u2019installateur, de l\u2019acheteur, du proprie\u0301taire, et de l\u2019utilisateur d\u2019installer, de maintenir en e\u0301tat et d\u2019ope\u0301rer les pie\u0300ces ou composantes manufacture\u0301es et fournies par Me\u0301taux Coule\u0301s BC Inc. Si les pie\u0300ces ou composantes doivent e\u0302tre inspecte\u0301es, nettoye\u0301es, entretenues ou change\u0301es, assurez-vous de couper l\u2019alimentation e\u0301lectrique du ou des moteurs entrai\u0302nant ces pie\u0300ces ou composantes, pour que personne ne puisse le ou les mettre en marche, afin de minimiser les risques de blessures ou de dommages a\u0300 la proprie\u0301te\u0301.\r\nDIMENSIONS : Dimensions noted in this catalog, mostly hub sizes, could be different than in tables for parts delivered finished bore. If any dimension is critical to your application, you must specify it.\r\nSAFETY : It is the responsibility of the contractor, the installer, the purchaser, the owner, and the user to install, maintain and operate the parts or the components manufactured and supplied by Me\u0301taux Coule\u0301s BC Inc. If parts or components are to be inspected, cleaned, observed, removed or general maintenance performed, be sure that the motor driving the parts or components is to be locked out electrically in such a manner that it cannot be started by anyone, to minimize risks of personal injury or property damage.\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

General data Pitch Diameter Constants See the document Pour obtenir le diame\u0300tre primitif d\u2019un sprocket, multipliez la constante du nombre de dents par le pas de la chai\u0302ne. To obtain pitch diameter of a sprocket, multiply the constant for the number of teeth from the table, by the chain pitch. Nb dents Nb teeth Constante […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":[],"yoast_head":"\nGeneral data - m\u00e9taux Coul\u00e9s BC inc.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/metauxbc.com\/en\/general-data\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"General data - m\u00e9taux Coul\u00e9s BC inc.\" \/>\n<meta property=\"og:description\" content=\"General data Pitch Diameter Constants See the document Pour obtenir le diame\u0300tre primitif d\u2019un sprocket, multipliez la constante du nombre de dents par le pas de la chai\u0302ne. To obtain pitch diameter of a sprocket, multiply the constant for the number of teeth from the table, by the chain pitch. Nb dents Nb teeth Constante […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/metauxbc.com\/en\/general-data\/\" \/>\n<meta property=\"og:site_name\" content=\"m\u00e9taux Coul\u00e9s BC inc.\" \/>\n<meta property=\"article:modified_time\" content=\"2020-01-07T19:16:22+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/metauxbc.com\/en\/general-data\/\",\"url\":\"https:\/\/metauxbc.com\/en\/general-data\/\",\"name\":\"General data - m\u00e9taux Coul\u00e9s BC inc.\",\"isPartOf\":{\"@id\":\"https:\/\/metauxbc.com\/en\/#website\"},\"datePublished\":\"2019-10-21T14:46:24+00:00\",\"dateModified\":\"2020-01-07T19:16:22+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/metauxbc.com\/en\/general-data\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/metauxbc.com\/en\/general-data\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/metauxbc.com\/en\/general-data\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Accueil\",\"item\":\"https:\/\/metauxbc.com\/en\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"General data\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/metauxbc.com\/en\/#website\",\"url\":\"https:\/\/metauxbc.com\/en\/\",\"name\":\"m\u00e9taux Coul\u00e9s BC inc.\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\/\/metauxbc.com\/en\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/metauxbc.com\/en\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/metauxbc.com\/en\/#organization\",\"name\":\"M\u00e9taux Coul\u00e9s BC\",\"url\":\"https:\/\/metauxbc.com\/en\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/metauxbc.com\/en\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/metauxbc.com\/wp-content\/uploads\/2019\/10\/metaux-coules-bc.png\",\"contentUrl\":\"https:\/\/metauxbc.com\/wp-content\/uploads\/2019\/10\/metaux-coules-bc.png\",\"width\":250,\"height\":136,\"caption\":\"M\u00e9taux Coul\u00e9s BC\"},\"image\":{\"@id\":\"https:\/\/metauxbc.com\/en\/#\/schema\/logo\/image\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"General data - m\u00e9taux Coul\u00e9s BC inc.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/metauxbc.com\/en\/general-data\/","og_locale":"en_US","og_type":"article","og_title":"General data - m\u00e9taux Coul\u00e9s BC inc.","og_description":"General data Pitch Diameter Constants See the document Pour obtenir le diame\u0300tre primitif d\u2019un sprocket, multipliez la constante du nombre de dents par le pas de la chai\u0302ne. To obtain pitch diameter of a sprocket, multiply the constant for the number of teeth from the table, by the chain pitch. Nb dents Nb teeth Constante […]","og_url":"https:\/\/metauxbc.com\/en\/general-data\/","og_site_name":"m\u00e9taux Coul\u00e9s BC inc.","article_modified_time":"2020-01-07T19:16:22+00:00","twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/metauxbc.com\/en\/general-data\/","url":"https:\/\/metauxbc.com\/en\/general-data\/","name":"General data - m\u00e9taux Coul\u00e9s BC inc.","isPartOf":{"@id":"https:\/\/metauxbc.com\/en\/#website"},"datePublished":"2019-10-21T14:46:24+00:00","dateModified":"2020-01-07T19:16:22+00:00","breadcrumb":{"@id":"https:\/\/metauxbc.com\/en\/general-data\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/metauxbc.com\/en\/general-data\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/metauxbc.com\/en\/general-data\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Accueil","item":"https:\/\/metauxbc.com\/en\/"},{"@type":"ListItem","position":2,"name":"General data"}]},{"@type":"WebSite","@id":"https:\/\/metauxbc.com\/en\/#website","url":"https:\/\/metauxbc.com\/en\/","name":"m\u00e9taux Coul\u00e9s BC inc.","description":"","publisher":{"@id":"https:\/\/metauxbc.com\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/metauxbc.com\/en\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/metauxbc.com\/en\/#organization","name":"M\u00e9taux Coul\u00e9s BC","url":"https:\/\/metauxbc.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/metauxbc.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/metauxbc.com\/wp-content\/uploads\/2019\/10\/metaux-coules-bc.png","contentUrl":"https:\/\/metauxbc.com\/wp-content\/uploads\/2019\/10\/metaux-coules-bc.png","width":250,"height":136,"caption":"M\u00e9taux Coul\u00e9s BC"},"image":{"@id":"https:\/\/metauxbc.com\/en\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/pages\/1025"}],"collection":[{"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/comments?post=1025"}],"version-history":[{"count":11,"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/pages\/1025\/revisions"}],"predecessor-version":[{"id":1416,"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/pages\/1025\/revisions\/1416"}],"wp:attachment":[{"href":"https:\/\/metauxbc.com\/en\/wp-json\/wp\/v2\/media?parent=1025"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}